I recommend using the Rear View Safety Universal Mirror Monitor # RVS-619N with the Rear View Safety Backup Camera System # RVS-770613-213. This is their larger 7" monitor which will give you a clear view with a color screen. view full answer...
If you take a look at where the seats attach to the floor of your 2013 Nissan NV 3500 you should be able to measure the amount of space between the floor and the nearest part of the seats that could potentially interfere with a mat such as # VTNV11. If there is more than 1/2 inch of space then technically you could modify the mat to work. However, doing so would void the warranty. view full answer...
To make your Blue Ox tow bar compatible with the Roadmaster Base Plates # RM-52359-5 that fit your 2016 Nissan NV 3500 you'll need the Blue Ox Tow Bar to Roadmaster EZ5, MS, and MX Base Plates Adapter Brackets # BX88185. view full answer...
We can help you protect both the interior and exterior of your 2017 Nissan NV 3500 passenger van.
On the linked page you can see all accessory items including floor mats, vehicle covers, cargo mats and seat covers. Just click on the category you're interested in to see products.
The VanRug Custom Floor Mat # VRNV11 is a full-size floor mat meant for the cargo van version of this vehicle, the one that has only the two front seats. You could use this item in your passenger van but you would... view full answer...
To install a Rhino-Rack Pioneer Platform Rack on your 2016 Nissan NV 3500 you need the 100" x 62" Platform # RR73QX which is a custom ditch-mount application. I really like it when the Pioneer installs directly to the vehicle and that's what you get with this setup.
Check out the review video and linked instructions to get a good idea of what the installation entails as well as our thoughts on the Pioneer.
If you let me know what you plan on using this for I'd be more than happy to make... view full answer...
You are correct the 4-Pole Flat wiring for the 2012 Nissan NV 3500 is part # 118553 which will power the lights on the trailer. It sounds like your trailer has brakes and you need a 7-Way plug which would require some hard wiring.
I recommend Universal Installation Kit for Trailer Brake Controller part # ETBC7 because it comes with all of the components needed to upgrade the 4-Way plug to a 7-way plug. I have attached an installation video on a 2012 Nissan NV. The installation does require... view full answer...
The RV Check Valve for Fresh Water Systems - 1/2" MPT x 1/2" FPT - Brass Item # 37262195 will work as long as the hose and spray port are 1/2" and the spray port has a male fitting. If the spray has a female fitting then I recommend the Valterra Check Valve for RV Fresh Water Systems - Dual 1/2" MPT - Brass Item # P23415LFVP. view full answer...
As long as you have room for the # PK-28WL2-BM you won't have a problem mounting it on your 2017 Nissan NV 3500. The rack has a tower height of 46-3/4". Considering the fact that someone mounted this on their NV 2500 I don't think you will have an issue, see the attached picture below. view full answer...
I have a great solution for you. Unfortunately, in order to mount the Yakima LockNLoad Platform Rack for Crossbars # Y05049-39 to your 2021 Nissan NV 3500, you will need a complete roof rack system with crossbars. However, we do carry a platform rack that will fit your vehicle without a roof rack system with crossbars. For this option, I recommend the Rhino-Rack Pioneer Platform Rack - Ditch Mount # RR73QX. The Rhino-Rack Pioneer Platform includes 8 roof rack legs and ditch brackets that... view full answer...
You would need to take some measurements to figure out if the Global Link RV Entry Door Locking Latch Kit part # 295-000019 is compatible with the 2015 Keystone Passport 2920BH travel trailer. The latch kit fits a door thickness of 1-1/4" to 1-1/2" thick. If your door already has a cut out from an existing latch the cut out needs to be 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. If your existing cut out is smaller it may need additional trimming to fit the new latch. Measuring your... view full answer...
Yes. The InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Keyed Alike - Qty 4 # 34061775-D have pin diameters of 5/8 inch and spans of 4-1/18 inches and 3-1/8 inches. The Curt Pintle Hook with 2-5/16" Ball - 2" Hitches - 13,000 lbs # C45910-15-20 uses 5/8 diameter pins that are 4-1/4 inches 3-1/4 inches based on the designed locks # C23556. The Infinite Rule Locking pins will absolutely work for this application. view full answer...
The VanTred Custom Floor Mat for Cargo Vans - Charcoal Gray - Thermoplastic # VTNV11 is a confirmed fit for the 2012-2016 Nissan NV 3500 models. I reached out to the manufacturer and they said this mat is designed to fit the corrugated groves of the metal floor, so you may not have the same traction on the mat if you use it on top of existing carpet, but with that considered you can put it on top of existing carpet it will just move more. view full answer...
You can install the Thule Artificial Rain Gutters, part # TH542, on your 2013 Nissan NV 3500. You will have to do some drilling in order to install these rain gutters. Once installed, you can then install the Thule TracRac TracVan Van Ladder Rack - 3 Bar - 750 lbs, part # TH29056XT.
I have included a product description link and video review link below. view full answer...
Yes the Kuat Pivot 2 Swing Away Hitch Extender part # PVP20B is compatible with a cargo carrier that has a 2" shank. This will allow you good flexibility in being able to get the carrier out of the way when you need to access your van's cargo area. Two things to keep in mind here is that the maximum capacity is 250 lbs. and when using the pivot your hitches cpapcity is reduced by 50 %. So as long as you don't exceed either of those weights you will be in great shape.
I added a video Adam... view full answer...
Due to the size and shape of the mirrors of your 2019 Nissan NV3500 there isn't a slip-on style of mirror that's going to fit. Instead you'd need to use a door mounted mirror like you mentioned with the part # 11650-2 for something that will fit well and provide you with a stable and wide viewing angle.
I attached a review video for this for you to check out as well. view full answer...
7- and 4-Pole Trailer Connector Socket # HM40975 plugs into what is called a US car connector which I do believe Nissan used in 2012. You can check your existing connector and if there is a harness plugged into the back of it that looks like the picture I have included then this connector will work on your 2012 Nissan NV 3500. view full answer...
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56148 is a confirmed fit for the Nissan NV 1500, 2500, and 3500 models between 2012 and 2020. There is not a separate fit for the cargo models from the passenger models because they utilize the same wiring. You can alternatively use # 118553 or # HM11143585 which are also confirmed to fit. These are all good options, so I recommend going with the best cost at that time of purchase. view full answer...
I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500.
However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts:
- Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2
- Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD
- Custom DK Fit Kit for 4 Rhino-Rack... view full answer...
Yes, you will need to adjust your weight distribution (WD) system depending on how much total tongue weight you have. If you have a system that is rated too high then your towing setup will be too stiff.
Out of the Steadi-Flex # RP66560 and the Strait-Line # RP66074 you are correct that the Strait-Line will be the easier of the 2 to adjust. They both have similar head adjustment options but when it comes to the arms it is much easier to adjust chain length and the bolts on the dual cams... view full answer...
The Valterra RV Water Tank # R8030 can mount vertically. It has threaded fittings with one open and plugged by a red cap, so as long as that's accessible you'd be fine. I've added a link to a video review of this tank for you to check out as well. view full answer...
Go To Results